Wiping 18 drives simultaneously

While cumulative imaging speed in TaskForce constitutes 15 TB/h, the engine can wipe up to 18 drives connected to it and achieve a cumulative speed of 15TB/h, 20TB/h or even more.

TaskForce’s task-oriented and efficient user interface is designed to enable the launch of every operation in just a couple of clicks to expedite work with multiple evidence drives.

TaskForce has 18 ports:

6 SATA,
6 SATA/SAS,
4 USB,
1 IDE,
1 Extension slot for Atola Thunderbolt, Apple PCIe SSD and M.2 NVMe/PCIe/SATA SSD extension modules,

all of which can be used for simultaneous wiping sessions.

TaskForce can wipe 18 devices simultaneously at their top native speeds when using the standard wiping method.

Launch multiple wiping sessions

To perform multiple wiping sessions:

Connect the drives to TaskForce.
Switch the ports, to which the drives are connected, to Target mode by using the individual Source switches on each port.

In the TaskForce user interface, click the Wipe icon on the left.
On the Select target device panel, select a drive.
To launch the wiping process for multiple drives simultaneously, select Multi-launch at the top right, and select the drives you want to wipe.

Adjust wiping settings:
- The range of sectors to be wiped.
- Wiping method.
- Enter a pattern and its format (HEX/ASCII).
Click Start.

The wiping process consecutively starts for each device. Repeat the same with all the drives you want to wipe.

Track the wiping progress

Once the operations have started, track the progress of all tasks on the Home screen. It displays the percentage of wiped drive area and the time left until the end of the planned session. To see more details on the progress of an individual wiping session, click on that session.

To reveal the current overall speed of wiping, click the Atola logo in the center of the top bar. In this case, we were able to achieve 18 TB/h. This high-speed wiping capability allows a forensic expert to complete the process of preparing drives for wiping in minimal time.

A wiping session can take longer if a different wiping method is selected. E.g. the NIST 800-88 method implies not only wiping but also rereading of the wiped range. The DoD 5220.22-M method wipes the same range three times.

To ensure maximum transparency and effectiveness, TaskForce documents every operation by creating detailed reports and logs. Click Reports at the top and find the report in the list or use the Search bar at the top of the page.